CD74HCT73M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT73 |
| Function | Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 38 ns |
| Family | HCT |
| Logic Function | Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 48 ns |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT73M Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). A package named Tubeincludes it. T flip flop uses Differentialas the output. This trigger uses the value Negative Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a JK Type. The FPGA belongs to the 74HCT series. A frequency of 60MHzshould not be exceeded by its output. As a result, it consumes 4μA of quiescent current without being affected by external factors. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74HCT73. Power is provided by a 5V supply. Its input capacitance is 10pFfarads. Devices in the HCTfamily are electronic devices. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 14. Its clock edge trigger type is Negative Edge. There is a base part number FF/Latchesfor the RS flip flops. In order for the device to operate, it requires 5V power supplies. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 4mA. 2 channels are available.
CD74HCT73M Features
Tube package
74HCT series
14 pins
5V power supplies
CD74HCT73M Applications
There are a lot of Texas Instruments CD74HCT73M Flip Flops applications.
- QML qualified product
- Frequency division
- Count Modes
- Buffer registers
- Memory
- Asynchronous counter
- Parallel data storage
- ESD protection
- Computing
- Buffered Clock
