CD74HCT73MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 38 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 38 ns |
| Family | HCT |
| Logic Function | JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Max I(ol) | 0.004 A |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT73MG4 Overview
SOICis the packaging method. In total, it contains 2 elements. There have been 14 terminations. It is powered from a supply voltage of 5V. HCTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 14 pins. This device has Negative Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part designed with 2bits is used in this application. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. It runs on 5Vvolts of power. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It has 1 output lines to operate. As a result, it consumes 4μA of quiescent current without being affected by external factors. -4mA is set as the high level output current. It is set to 4mAfor low level output current. Operating temperatures should be lower than 125°C. Ideally, the operating temperature should be greater than -55°C. It is powered by 4.5V as its minimum supply voltage. There is a maximum supply voltage of 5.5V. It is possible to achieve 60MHz frequencies. J-K FLIP-FLOPis the logic IC it uses. A total of 2 functions are provided by this T flip flop. With 14 pins, it is equipped with a low power consumption.
CD74HCT73MG4 Features
14 pins
2 Bits
5V power supplies
2 Functions
14 pin count
CD74HCT73MG4 Applications
There are a lot of Texas Instruments CD74HCT73MG4 Flip Flops applications.
- Computing
- ATE
- Storage Registers
- Clock pulse
- ESD performance
- Bus hold
- Individual Asynchronous Resets
- Control circuits
- Reduced system switching noise
- Patented noise
