CD74HCT74M96
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 50MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
CD74HCT74M96 Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. A package named Cut Tape (CT)includes it. T flip flop uses Differentialas its output configuration. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. -55°C~125°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74HCT series. There should be no greater frequency than 50MHzon its output. Currently, there are 14 terminations. It is a member of the 74HCT74 family. Power is supplied from a voltage of 5V volts. There is 10pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HCT. In this case, the electronic component is mounted in the way of Surface Mount. A total of 14pins are provided on this board. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latch. Using 2 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TR. An electrical current of 5V volts is applied to it. High efficiency requires the supply voltage to be maintained at 5V. It operates with 1 output lines. It consumes 4μA current.
CD74HCT74M96 Features
Cut Tape (CT) package
74HCT series
14 pins
5V power supplies
CD74HCT74M96 Applications
There are a lot of Texas Instruments CD74HCT74M96 Flip Flops applications.
- Control circuits
- ESD protection
- Matched Rise and Fall
- Balanced 24 mA output drivers
- Digital electronics systems
- Bus hold
- Cold spare funcion
- Latch
- Frequency Dividers
- Balanced Propagation Delays
