CD74HCT74MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT74MT Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. Differentialis the output configured for it. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. The FPGA belongs to the 74HCT series. A frequency of 50MHzshould not be exceeded by its output. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74HCT74 family. An input voltage of 5Vpowers the D latch. There is 10pF input capacitance for this T flip flop. HCTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 14. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. The D latch operates on 5V volts. For high efficiency, the supply voltage should be set to 5V. With an output current of 4mA, this device offers maximum design flexibility. The JK flip flop is with 1 output lines to operate. It consumes 4μA current.
CD74HCT74MT Features
Tape & Reel (TR) package
74HCT series
14 pins
5V power supplies
CD74HCT74MT Applications
There are a lot of Texas Instruments CD74HCT74MT Flip Flops applications.
- Latch-up performance
- ESD performance
- Single Up Count-Control Line
- Cold spare funcion
- Safety Clamp
- QML qualified product
- Pattern generators
- Convert a momentary switch to a toggle switch
- Counters
- Load Control
