CD74HCT74MTE4
| Parameters | |
|---|---|
| Quiescent Current | 4μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 50MHz |
| Propagation Delay | 35 ns |
CD74HCT74MTE4 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tape & Reel (TR)package. This output is configured with Differential. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -55°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74HCT series. It should not exceed 50MHzin terms of its output frequency. Terminations are 14. The 74HCT74family includes it. The D flip flop is powered by a voltage of 5V . A 10pFfarad input capacitance is provided by this T flip flop. HCTis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Using 2 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TR. The D latch operates on 5V volts. For high efficiency, the supply voltage should be set to 5V. To operate, the chip has a total of 1 output lines. There is 4μA quiescent current consumption by it.
CD74HCT74MTE4 Features
Tape & Reel (TR) package
74HCT series
14 pins
5V power supplies
CD74HCT74MTE4 Applications
There are a lot of Texas Instruments CD74HCT74MTE4 Flip Flops applications.
- Cold spare funcion
- Count Modes
- Supports Live Insertion
- Registers
- Functionally equivalent to the MC10/100EL29
- Shift Registers
- Test & Measurement
- Modulo – n – counter
- Frequency Dividers
- Bounce elimination switch
