CD74HCT75M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT75 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 2:2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 4 |
| Propagation Delay | 45 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 11 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 35 ns |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Number of Output Lines | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT75M Overview
The 16-SOIC (0.154, 3.90mm Width) package contains it. As a result, it has a packaging of Tube. There is a Differential output configured. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. There is -55°C~125°C operating temperature. The 74HCT series of FPGAs is the one this FPGA belongs to. This electronic part is designed with 4 Bits. As far as this device is concerned, it has no terminations. It belongs to 74HCT75 family. The supply voltage of the device is 5V. The 16 pind are equipped with it. HCT is the family name of this electronic device. With the design of the board, there are only 16 pins. A Surface Mount mounting method has been used for this electronic part. FF/Latches is the subcategory of this part. 5V power supplies are needed to operate it. Its output current of 4mA ensures maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. It follows that 4 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 4μA quiescent current. A total of 2 elements are contained in it.
CD74HCT75M Features
16-SOIC (0.154, 3.90mm Width) package
74HCT series
4 Bits
74HCT75 family
16 pin count
16 pins
5V power supplies
2 elements
CD74HCT75M Applications
There are a lot of Texas Instruments CD74HCT75M Latches applications.
- A/D converters
- Shift register
- Buffer register
- General-Purpose Register
- Relay
- Parallel data storage
- Parallel Input
- Buffer Storage
- Clocks
- TV Set-top Boxes
