CD74HCT75MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 4mA |
| Number of Bits | 2 |
| Propagation Delay | 45 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 11 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Logic IC Type | D LATCH |
| Trigger Type | HIGH LEVEL |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Number of Input Lines | 4 |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT75MG4 Overview
The package in which it is embedded is named SOIC. The design of this electronic part contains 2 bits. In this device, there are 16 terminations that have been designed. With the supply voltage set at 5V, it is able to operate. The 16 pind are equipped with it. It is a member of the HCT family of electronic devices. The pin configuration of the device is 16. A Surface Mount mounting method has been used for this electronic part. This part is included in FF/Latches. The device is powered by 5V power supplies. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This device is well suited for TUBE based on its reliable performance. The supply voltage should be maintained at 5V for high efficiency. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. A total of 2 elements are contained in it. In the low level output current, the value is set to 4mA. -4mA represents the high level output current. Lower than 125°C is the ideal operating temperature. A temperature greater than -55°C should be used as the operating temperature. It supports the maximal supply voltage of 5.5V. With a minimum supply voltage of 4.5V, it operates. As far as the logic IC is concerned, it uses D LATCH. With an output current of 4mA, it is highly flexible in terms of design.
CD74HCT75MG4 Features
SOIC package
2 Bits
16 pin count
16 pins
5V power supplies
2 elements
CD74HCT75MG4 Applications
There are a lot of Texas Instruments CD74HCT75MG4 Latches applications.
- Frequency dividing
- Automotive Body Electronics
- Relay
- Storage
- Counter control
- Watches
- Parallel data synchronization
- Relay replacement
- Up/down difference counting
- Automotive ADAS
