banner_page

CDC7005GVAT

3.3V Clock Synchronizer and Jitter Cleaner 800MHz CDC7005 Clock Generators 64 Pins 64-BGA 64 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CDC7005GVAT
  • Package: 64-BGA
  • Datasheet: PDF
  • Stock: 694
  • Description: 3.3V Clock Synchronizer and Jitter Cleaner 800MHz CDC7005 Clock Generators 64 Pins 64-BGA 64 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Contact Plating Lead, Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 64-BGA
Number of Pins 64
Weight 170.210537mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 64
ECCN Code EAR99
Type Clock Synchronizer and Jitter Cleaner
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Clock Driver
Voltage - Supply 3V~3.6V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 235
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Base Part Number CDC7005
Output LVPECL
Pin Count 64
Number of Outputs 5
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Frequency (Max) 800MHz
Input LVCMOS, LVPECL
Ratio - Input:Output 2:5
PLL No
Differential - Input:Output Yes/Yes
fmax-Min 800 MHz
Same Edge Skew-Max (tskwd) 0.06 ns
Length 8mm
Width 8mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

CDC7005GVAT Overview


As a clock IC, it is packaged by the Tape & Reel (TR) method. The 64-BGA package contains this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 235. As a result, frequency synthesizers can be found to contain 64 terminations. Basically, this time clock generator needs a voltage of 3.3V. This clock generator receives its inputs from LVCMOS, LVPECL, which is designed to be the clock source. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 800MHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. This frequency synthesizer requires a supply voltage above 3V to be safe. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. There are several logic levels in LVPECL logic that can be used with this clock generator. An electrical part such as this one can be classified as a Clock Synchronizer and Jitter Cleaner component. It is a 64-bit clock PLL designed specifically for microprocessors. You can find related electrical components to the base part number CDC7005. A 64 pin is available on the clock PLL. The supply voltage should be maintained at 3.3V for high efficiency. In general, this clock PLL is considered a Clock Driver device. Clock PLL has 5 signal outputs to maximi5e output frequency. At maximum 0.06 ns, this analog clock generator has low timing skew.

CDC7005GVAT Features


Available in the 64-BGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC7005GVAT Applications


There are a lot of Texas Instruments CDC7005GVAT Clock Generators applications.

  • Deep space exploration
  • Navigation, positioning and surveillance system for aircraft, ships and ships
  • Carrier synchronization in wired communication
  • Clock generation systems
  • Multiplexing communication
  • Line cards used in telephone exchange
  • Pulsed digital systems
  • Automatic test equipment
  • High-frequency induction heating
  • Medical equipment

Write a review

Note: HTML is not translated!
    Bad           Good