banner_page

CDC7005RGZT

3.3V Clock Synchronizer and Jitter Cleaner CDC7005 Clock Generators 48 Pins 48-VFQFN Exposed Pad 48 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CDC7005RGZT
  • Package: 48-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 436
  • Description: 3.3V Clock Synchronizer and Jitter Cleaner CDC7005 Clock Generators 48 Pins 48-VFQFN Exposed Pad 48 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-VFQFN Exposed Pad
Number of Pins 48
Weight 138.005479mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
ECCN Code EAR99
Type Clock Synchronizer and Jitter Cleaner
Packing Method TR
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Frequency 800MHz
Base Part Number CDC7005
Output LVPECL
Pin Count 48
Number of Outputs 5
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Number of Inputs 1
Input LVCMOS, LVPECL
Ratio - Input:Output 2:5
Max I(ol) 0.006 A
PLL No
Differential - Input:Output Yes/Yes
Same Edge Skew-Max (tskwd) 0.06 ns
Height 1mm
Length 7mm
Width 7mm
Thickness 900μm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CDC7005RGZT Overview


This clock IC is packaged using the Tape & Reel (TR) method. The 48-VFQFN Exposed Pad package contains this clock generator. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 48 terminations can be found in frequency generators. To operate this time clock generator, 3.3V voltage should be applied. A clock generator's input is called LVCMOS, LVPECL and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. LVPECL is designed for clock generator's output. This electronic component can be classified into Clock Synchronizer and Jitter Cleaner. The clock-generating IC is a 48-bit device designed specifically for microprocessors. According to the base part number, its related parts can be founded. PLL is designed with 48 pins. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. As a result of this digital clock generator, there is a low timing skew at 0.06 ns max. By operating at a frequency of 800MHz, RF synthesizer is able to reali800MHze high efficiency. It is ideal for this electronic frequency generator to use the TR package. On this time clock generator, there are 1 inputs.

CDC7005RGZT Features


Available in the 48-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC7005RGZT Applications


There are a lot of Texas Instruments CDC7005RGZT Clock Generators applications.

  • High-speed communication applications
  • Microwave radio
  • Signal modulation and demodulation
  • Phase modulation cellular systems
  • Threshold extension
  • Wide area power system
  • Antenna automatic tracking
  • Digital logic circuits
  • Infotainment systems
  • Sampling clocks for ADC and DAC

Write a review

Note: HTML is not translated!
    Bad           Good