CDCE18005RGZT
| Parameters | |
|---|---|
| Width | 7mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 138.005479mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Packing Method | TR |
| Max Power Dissipation | 1W |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 250MHz |
| Base Part Number | CDCE18005 |
| Output | LVCMOS, LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 5 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 4 ns |
| Frequency (Max) | 1.5GHz |
| Family | CDC |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 3:10 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Input Current | 20mA |
| Divider/Multiplier | Yes/No |
| Height | 1mm |
| Length | 7mm |
CDCE18005RGZT Overview
Clock generator is packaged in the way of Tape & Reel (TR). 48-VFQFN Exposed Pad contains this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. As you can see, it consists of 48 terminations. Clock generator ics require a voltage of 3.3V. LVCMOS, LVDS, LVPECL is designed for clock generator's input. A total of 1 circuits are implemented to access the full performance of the electrical part. A clock-based RF synthesizer that provides a max frequency of 1.5GHz is available. Surface Mount-slots make it easy to mount this electronic component on panels. 3.6V would be the maximum supply voltage for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. Clock generators should operate with the voltage supply of 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. As the name suggests, this is a clock generator that is compatible with LVCMOS, LVDS, LVPECL logic levels. An electrical part such as this one can be classified as a Clock Generator component. There is a 48-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number CDCE18005 are listed below. There is an available 48 pin on the PLL. The frequency synthesizer features 5 signal outputs to ensure as high a frequency as possible. CDC-family clock generators are similar. At a frequency of 250MHz, frequency generator is capable of achieving high efficiency. Ideally, this electronic frequency generator fits the TR package.
CDCE18005RGZT Features
Available in the 48-VFQFN Exposed Pad
Supply voltage of 3.3V
CDCE18005RGZT Applications
There are a lot of Texas Instruments CDCE18005RGZT Clock Generators applications.
- Medical equipment
- Motor speed controls
- Digital switching systems
- Digital logic circuits
- Remote telemetry and instrumentation
- Multiplexing communication
- Signal demodulation
- Ports
- Signal analyzer
- Sampling clocks for ADC and DAC
