Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
32-VFQFN Exposed Pad |
Number of Pins |
32 |
Weight |
72.206235mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Type |
Clock Generator |
Subcategory |
Clock Driver |
Packing Method |
TR |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
1.175GHz |
Base Part Number |
CDCE62002 |
Output |
LVCMOS, LVDS, LVPECL |
Pin Count |
32 |
Number of Outputs |
2 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Operating Supply Current |
20mA |
Load Capacitance |
5pF |
Nominal Supply Current |
20mA |
Max Supply Current |
20μA |
Input |
LVCMOS, LVDS, LVPECL, Crystal |
Ratio - Input:Output |
2:2 |
PLL |
Yes |
Differential - Input:Output |
Yes/Yes |
Divider/Multiplier |
Yes/No |
Height |
1mm |
Length |
5mm |
Width |
5mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CDCE62002RHBT Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. A Clock PLL is included with the 32-VFQFN Exposed Pad package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. In it, there are 32 terminations to be found. Clock generator ics require a voltage of 3.3V. LVCMOS, LVDS, LVPECL, Crystal is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. 3.6V would be the maximum supply voltage for this clock generator. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with LVCMOS, LVDS, LVPECL logic levels. It has been classified as a Clock Generator electronic part, which means that it is a semiconductor. It is a 32-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number CDCE62002. It is possible to connect to the frequency generators via 32 pins. The supply voltage should be maintained at 3.3V for high efficiency. The device is usually classified as a type of Clock Driver device. The output frequency is magnified as high as possible with 2 signal outputs. At frequencies of 1.175GHz, RF synthesizer achieves high efficiency. This time clock generator requires a supply current of 20mA in order to operate properly. This frequency synthesizer operates at a maximum current of 20μA. A loading capacitance of 5pF is capable of being delivered through it. Phase locked loop is well suited for TR based on PLL's reliable performance.
CDCE62002RHBT Features
Available in the 32-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 5pF
CDCE62002RHBT Applications
There are a lot of Texas Instruments CDCE62002RHBT Clock Generators applications.
- Jitter reduction
- Space communucation
- Clock generation systems
- Radiotelephones
- Multiplexing communication
- Microwave radio
- Coherent detection of the signal
- Notebooks
- Wireless infrastructure
- DVD add-on cards for multimedia PCs