CDCE906PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | PLL Frequency Synthesizer |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 167MHz |
| Base Part Number | CDCE906 |
| Output | LVCMOS |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Nominal Supply Current | 115mA |
| Max Supply Current | 115mA |
| Logic Function | Clock |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 167MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/No |
| Input Current | 5μA |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCE906PWG4 Overview
As a clock IC, it is packaged by the Tube method. In the 20-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains a total of 20 terminations within RF synthesizer. For this clock generator ic, a voltage of 3.3V is required. It is designed that the Clock PLL's input should be LVCMOS, Crystal. There are 1 circuits implemented in order to achieve full performance from this electronic part. With the Surface Mount, it is easy to install this electric component on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. It's compatible with LVCMOS logic levels. A PLL Frequency Synthesizer is a classification for the electronic part in question. Microprocessor-specific clock PLL with 20 bits. This part number CDCE906 is related to the following electrical components. It is possible to connect to the frequency generators via 20 pins. There is a maximum supply voltage of 3.3V that frequency generators can handle. The output frequency can be amplified as high as possible with its 6 signal outputs. At frequencies of 167MHz, RF synthesizer achieves high efficiency. IC clock generator consists of 3 elements. During this clock generator operation, a maximum current of 115mA is supplied. Input data is processed by combining clock logic function Clock.
CDCE906PWG4 Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDCE906PWG4 Applications
There are a lot of Texas Instruments CDCE906PWG4 Clock Generators applications.
- Antenna automatic tracking
- Jitter reduction
- Myriad digital applications
- HDD recorders
- Computers to manage memory cards
- Vector network analyzers (VNA)
- DVD recorders
- Main oscillator in receiver
- Bluetooth receivers
- Closed circuit systems
