CDCE913PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Spread Spectrum Clock Driver |
| Subcategory | Clock Generators |
| Voltage - Supply | 1.7V~1.9V 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 160MHz |
| Base Part Number | CDCE913 |
| Output | LVCMOS |
| Pin Count | 14 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 1.8V |
| Interface | I2C |
| Number of Circuits | 1 |
| Nominal Supply Current | 11mA |
| Max Supply Current | 11mA |
| Frequency (Max) | 230MHz |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 32MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Input Current | 5μA |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCE913PW Overview
As a clock IC, it is packaged by the Tube method. The 14-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 14 terminations can be found in frequency generators. The clock generator ic should be grounded with a voltage of 1.8V. As the Clock PLL's input, LVCMOS, Crystal is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 230MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. As long as you provide 1.7V~1.9V 2.3V~3.6V supply voltage, it will work. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. It's compatible with LVCMOS logic levels. It has been classified as a Spread Spectrum Clock Driver electronic part, which means that it is a semiconductor. It is a 14-bit clock PLL designed specifically for microprocessors. The related electrical components for the base part number CDCE913 can be found below. There are 14 pins on the frequency generator that are available for use. The maximum supply voltage that clock generator can handle is 1.8V. Clock generator can also be included into Clock Generators. 3 signal outputs allow for maximi3ation of output frequency. Frequency generator is able to reali160MHze high efficiency when operating at a frequency of 160MHz. When this RF synthesizer is operated at its maximum current, it will supply 11mA.
CDCE913PW Features
Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 1.8V
Operating supply voltage of 1.8V
CDCE913PW Applications
There are a lot of Texas Instruments CDCE913PW Clock Generators applications.
- Digital HDTV systems
- Signal analyzer
- Small signal recovery
- Clock generation systems
- Radiotelephones
- FSK demodulators
- Wi-Fi routers
- Wireless handsets
- Aerospace and defense
- Notebooks
