CDCE913PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Spread Spectrum Clock Driver |
| Subcategory | Clock Generators |
| Voltage - Supply | 1.7V~1.9V 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 230MHz |
| Base Part Number | CDCE913 |
| Output | LVCMOS |
| Pin Count | 14 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 1.8V |
| Number of Circuits | 1 |
| Nominal Supply Current | 11mA |
| Max Supply Current | 11mA |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 32MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Input Current | 5μA |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCE913PWG4 Overview
Clock ICs are packaged using the Tube method. In the 14-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. As a result of this, we can find 14 terminations. For this clock generator ic, a voltage of 1.8V is required. The input of this clock generator is designed to be LVCMOS, Crystal. It is possible to access the full performance of the electrical part by implementing 1 circuits. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators should operate with the voltage supply of 1.7V~1.9V 2.3V~3.6V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. An electrical part such as this one can be classified as a Spread Spectrum Clock Driver component. An IC that generates clocks specifically for microprocessors, this clock PLL is 14-bits in si14e. Related electrical parts can be found for the base part number CDCE913. The frequency generator is equipped with 14 pins. This time clock generator can handle a voltage of 1.8V as its supply voltage. This clock generator can be classified as a kind of Clock Generators in general. 3 signal outputs enable clock PLL to magnify output frequency as high as possible. By operating at a frequency of 230MHz, frequency generator is able to achieve high efficiency. This frequency synthesizer operates at a maximum current of 11mA.
CDCE913PWG4 Features
Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 1.8V
Operating supply voltage of 1.8V
CDCE913PWG4 Applications
There are a lot of Texas Instruments CDCE913PWG4 Clock Generators applications.
- 1 Gigabit Ethernet
- Test and instrumentation equipment
- Aerospace and defense
- Quenching?
- Radar
- Radiotelephones
- Line cards used in telephone exchange
- Pagers
- GPS systems
- Antenna automatic tracking
