CDCE913PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Spread Spectrum Clock Driver |
| Subcategory | Clock Generators |
| Voltage - Supply | 1.7V~1.9V 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 160MHz |
| Base Part Number | CDCE913 |
| Output | LVCMOS |
| Pin Count | 14 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 1.8V |
| Number of Circuits | 1 |
| Nominal Supply Current | 11mA |
| Frequency (Max) | 230MHz |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 32MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCE913PWRG4 Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 14-TSSOP (0.173, 4.40mm Width) package contains this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 14 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. This Clock PLL will be fed by LVCMOS, Crystal as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. A clock-based RF synthesizer that provides a max frequency of 230MHz is available. Because of the Surface Mount, clock PLL can be easily mounted on the panel. As long as there are 1.7V~1.9V 2.3V~3.6V supply voltages provided, clock generator ic should work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. As far as this electronic part is concerned, it can be classified as a Spread Spectrum Clock Driver component. It is a 14-bit IC that is designed for microprocessors specifically. This part number CDCE913 is related to the following electrical components. There are 14 pins that are available on the frequency generator. In terms of the supply voltage, analog clock generator can handle 1.8V volts. The clock PLL is generally classified as a Clock Generators device. The output frequency is magnified as high as possible with 3 signal outputs. At 160MHz, frequency synthesizer achieves high efficiency.
CDCE913PWRG4 Features
Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 1.8V
Operating supply voltage of 1.8V
CDCE913PWRG4 Applications
There are a lot of Texas Instruments CDCE913PWRG4 Clock Generators applications.
- Digital logic circuits
- Antenna automatic tracking
- Coherent carrier tracking
- Telecommunication systems
- VSAT (Small Ground Satellite Station)
- Space communucation
- Frequency shifting decodes
- HDD recorders
- Deep space exploration
- Peripheral devices
