CDCF2509PW
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 140MHz |
| Base Part Number | CDCF2509 |
| Pin Count | 24 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10μA |
| Power Dissipation | 700mW |
| Quiescent Current | 10μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Input | Clock |
| Ratio - Input:Output | 1:9 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Main Purpose | Memory, DRAM DIMM |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CDCF2509PW Overview
The Tube package provides access to it. In order to ensure the safety and security of the product, it is packaged in a case with a 24-TSSOP (0.173, 4.40mm Width)-serial number. In general, Surface Mount is recommended as the mounting type. 24 terminations are found in it. Parts provide 3.3V volts. In order to run 260, the peak reflow temperature of this part is taken into account. As of the moment, the device has 1. When the maximal supply voltage (Vsup) reaches 3.6V, the device is considered to be functional. For normaloperation, the supply voltage (Vsup) should be kept above 3V. Clock program is possible to adjust the operating temperature range of 0°C~85°C. Components can supply voltages of 3V~3.6V. Component Memory, DRAM DIMM serves the main purpose. Searching for information about CDCF2509 starts with the base part number. Surface Mount is recommended for mounting. Devices with 24 pins are designed. There are 24 pins on it. 3.3V is the recommended supply voltage. There is the ability to maintain 9 outputs on the device. At 140MHz frequency, it is highly efficient.
CDCF2509PW Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 24 Pins
operate supply voltage at the range of 3.3V
CDCF2509PW Applications
There are a lot of Texas Instruments CDCF2509PW application specific timer?applications.
- Ethernet Switches, Routers
- Storage area networks
- Communications
- MSAN/DSLAM/PON
- Broadcast video
- Printers, scanners, projectors
- Broadcast video/audio timing
- Servers, storage
- Servers
- Processor and FPGA clocking
