CDCF2510PW
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 140MHz |
| Base Part Number | CDCF2510 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10μA |
| Power Dissipation | 700mW |
| Quiescent Current | 10μA |
| Output Characteristics | SERIES-RESISTOR |
| Input | Clock |
| Ratio - Input:Output | 1:10 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Main Purpose | Memory, DRAM DIMM |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCF2510PW Overview
Clock program is accessible in the Tube package. In a 24-TSSOP (0.173, 4.40mm Width)-shaped case, it comes. Mounting type Surface Mount is recommended. Clock program contains 24 terminations. The part provides 3.3V voltage. The peak reflow temperature is used to run 260. As of the moment, the device has 1. There is 3.6V supply voltage (Vsup) greater than 3.6V. Clock program is important to keep the supply voltage (Vsup) above 3V for the device to operate normally. Temperatures can be varied in the operating range of 0°C~85°C. There is a possibility of the component supplying a voltage of 3V~3.6V. This component primarily serves the purpose of Memory, DRAM DIMM. You will be able to search for information based on CDCF2510. The Surface Mount mount is recommended. With 24 pins, the device is designed. The board contains 24 pins. 3.3V is the recommended supply voltage. There is the ability to maintain 10 outputs on the device. When working at a frequency of 140MHz, it is able to achieve excellent efficiency.
CDCF2510PW Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 24 Pins
operate supply voltage at the range of 3.3V
CDCF2510PW Applications
There are a lot of Texas Instruments CDCF2510PW application specific timer?applications.
- Test and Measurement
- Processor and FPGA clocking
- Servers, Storage, Search Acceleration
- Broadcast video
- Network Attached Storage
- BBU (Baseband Unit)
- Small Cells, Mobile Backhaul/Fronthaul
- Broadcast Video
- Printers, scanners, projectors
- Printers
