CDCF2510PWG4
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 140MHz |
| Base Part Number | CDCF2510 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10μA |
| Power Dissipation | 700mW |
| Quiescent Current | 10μA |
| Output Characteristics | SERIES-RESISTOR |
| Input | Clock |
| Ratio - Input:Output | 1:10 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Main Purpose | Memory, DRAM DIMM |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
CDCF2510PWG4 Overview
There is a Tube package that contains it. In a 24-TSSOP (0.173, 4.40mm Width)-shaped case, it comes. In general, Surface Mount is recommended as the mounting type. As far as terminations are concerned, there are 24. There is 3.3V voltage provided by the part. 260 runs using this part's peak reflow temperature. There are 1 on the device. There is 3.6V supply voltage (Vsup) greater than 3.6V. normally, the supply voltage (Vsup) should remain above 3V. Temperatures can be varied in the operating range of 0°C~85°C. Depending on the component, a voltage of 3V~3.6V can be supplied. The component's main purpose is Memory, DRAM DIMM. In order to search for information, you will use the base part number CDCF2510. The Surface Mount mounting method is recommended. 24 pins are on the device. Circuits application has 24 pins. Keeping the supply voltage at 3.3V is recommended. A 10 output can be maintained on the device. An excellent efficiency can be achieved when working at a frequency of 140MHz.
CDCF2510PWG4 Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 24 Pins
operate supply voltage at the range of 3.3V
CDCF2510PWG4 Applications
There are a lot of Texas Instruments CDCF2510PWG4 application specific timer?applications.
- Telecom line cards
- XO replacement
- Communications
- Handheld Instrumentation
- Fibre Channel, SAN
- HDTV, DVD/Blu-ray, set-top box
- Broadcast Video
- Small Cells, Mobile Backhaul/Fronthaul
- Laser range finder
- Broadcast video/audio timing
