CDCF2510PWRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 140MHz |
| Base Part Number | CDCF2510 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10μA |
| Power Dissipation | 700mW |
| Quiescent Current | 10μA |
| Output Characteristics | SERIES-RESISTOR |
| Input | Clock |
| Ratio - Input:Output | 1:10 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Main Purpose | Memory, DRAM DIMM |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCF2510PWRG4 Overview
The Tape & Reel (TR) package contains it. There is a case with 24-TSSOP (0.173, 4.40mm Width) included. The recommended mounting type is Surface Mount. Clock program contains 24 terminations. The part provides 3.3V voltage. To run 260, we use the peak reflow temperature of this part. As of right 1w, the device has 1. When the maximal supply voltage (Vsup) reaches 3.6V, the device is considered to be functional. In order for normaloperation, the supply voltage (Vsup) should be maintained above 3V volts. 0°C~85°C operates within a range of temperatures. Depending on the component, a voltage of 3V~3.6V can be supplied. This component serves a single purpose Memory, DRAM DIMM. The base part number CDCF2510 is the place where you can start your search for information. Ideally, it should be mounted with Surface Mount. With 24 pins, the device is designed. There are 24 pins on it. Keeping the supply voltage at 3.3V is recommended. This device can handle 10 outputs on it. At 140MHz frequency, it is highly efficient.
CDCF2510PWRG4 Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 24 Pins
operate supply voltage at the range of 3.3V
CDCF2510PWRG4 Applications
There are a lot of Texas Instruments CDCF2510PWRG4 application specific timer?applications.
- Any-frequency clock conversion
- Test and Measurement
- Audio/video
- OTN Muxponders and Transponders
- 1 GbE and 10 GbE
- Printers
- Broadcast video/audio timing
- Fibre Channel, SAN
- Switches/routers
- Wireless Infrastructure
