Parameters |
Frequency |
683.28MHz |
Base Part Number |
CDCM61001 |
Output |
LVCMOS, LVDS, LVPECL |
Pin Count |
32 |
Number of Outputs |
1 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Operating Supply Current |
108mA |
Load Capacitance |
5pF |
Nominal Supply Current |
100mA |
Max Supply Current |
65mA |
Input |
LVCMOS, Crystal |
Ratio - Input:Output |
1:2 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Input Current |
200mA |
Divider/Multiplier |
Yes/No |
fmax-Min |
683.264 MHz |
Height |
1mm |
Length |
5mm |
Width |
5mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
32-VFQFN Exposed Pad |
Number of Pins |
32 |
Weight |
72.206235mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
32 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Clock Generator |
Subcategory |
Clock Driver |
Packing Method |
TR |
Max Power Dissipation |
340mW |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
CDCM61001RHBT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. The 32-VFQFN Exposed Pad package embeds this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. 32 terminations can be found in frequency generators. The supply voltage of 3.3V allows for high efficiency. This clock generator receives its inputs from LVCMOS, Crystal, which is designed to be the clock source. With the Surface Mount, it is easy to install this electric component on the panel. It would be possible to supply this clock PLL with 3.6V of power. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock generator ic works with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. I would like to present to you a frequency synthesizer that is compatible with LVCMOS, LVDS, LVPECL logic levels. This is an electronic part that can be classified as a Clock Generator in this case. It is a 32-bit IC that is designed for microprocessors specifically. It is possible to find its related electronic parts by searching for the base part number CDCM61001. There are a number of 32 pins that are available on the frequency synthesizers. Electronic frequency generator can handle voltages up to 3.3V. And basically, this clock generator is often classified as a kind of Clock Driver. 1 signal outputs maximi1e the output frequency. Frequency generator is able to reali683.28MHze high efficiency when operating at a frequency of 683.28MHz. In order for it to fully perform time clock generator's functions, it needs a supply current of 108mA. The maximal current supplied for phase locked loop's operation reaches 65mA. In order to obtain a load capacitance of 5pF, the PLL is capable of generating a large voltage. There is no doubt that the TR package is an ideal fit for this clock generator ic.
CDCM61001RHBT Features
Available in the 32-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 5pF
CDCM61001RHBT Applications
There are a lot of Texas Instruments CDCM61001RHBT Clock Generators applications.
- Notebooks
- Multi-function printers
- Multiplexing communication
- Satellite receivers
- Space communucation
- 10 Gigabit Ethernet
- Microwave backhaul IF
- Camera systems
- Set-top boxes
- Navigation, positioning and surveillance system for aircraft, ships and ships