Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
32-VFQFN Exposed Pad |
Number of Pins |
32 |
Weight |
72.206235mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Type |
Clock Generator |
Subcategory |
Clock Driver |
Packing Method |
TR |
Max Power Dissipation |
340mW |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
683.28MHz |
Base Part Number |
CDCM61002 |
Output |
LVCMOS, LVDS, LVPECL |
Pin Count |
32 |
Number of Outputs |
2 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Operating Supply Current |
108mA |
Load Capacitance |
5pF |
Max Supply Current |
65mA |
Input |
LVCMOS, Crystal |
Ratio - Input:Output |
1:3 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Input Current |
200mA |
Divider/Multiplier |
Yes/No |
Same Edge Skew-Max (tskwd) |
0.05 ns |
Height |
1mm |
Length |
5mm |
Width |
5mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CDCM61002RHBT Overview
As a clock IC, it uses the Tape & Reel (TR) package. 32-VFQFN Exposed Pad contains this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 32 terminations found in the file. This clock generator ic should receive a voltage of 3.3V. As the Clock PLL's input, LVCMOS, Crystal is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock generator ic works with 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. LVCMOS, LVDS, LVPECL is designed for clock generator's output. It has been classified as a Clock Generator electronic part, which means that it is a semiconductor. In particular, this clock PLL is designed to be used with microprocessors. CDCM61002 is the base part number for finding related electronic parts. There are 32 pins on the frequency generator that are available for use. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The clock PLL is generally classified as a Clock Driver device. 2 signal outputs maximi2e the output frequency. The timing skew of this frequency synthesizer is low at 0.05 nsmax. At a frequency of 683.28MHz, frequency generator is capable of achieving high efficiency. For the clock time generator to function properly, 108mA of supply current must be provided. It is possible to supply up to 65mA of current for this clock generator operation. As a result, the load capacitance of this PLL is 5pF. TR is an ideal package for this electronic frequency generator.
CDCM61002RHBT Features
Available in the 32-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 5pF
CDCM61002RHBT Applications
There are a lot of Texas Instruments CDCM61002RHBT Clock Generators applications.
- Coherent detection of the signal
- Motor speed controls
- Precision auxiliary angle deflection measurement
- Signal generator
- Coherent carrier tracking
- Cellular/4G
- Jitter reduction
- Simple clock clean-up circuits
- Microwave backhaul IF
- Space communucation