CDCM61004RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Packing Method | TR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 683.28MHz |
| Base Part Number | CDCM61004 |
| Output | LVCMOS, LVDS, LVPECL |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 108mA |
| Load Capacitance | 5pF |
| Nominal Supply Current | 215mA |
| Max Supply Current | 65mA |
| Frequency (Max) | 683.27MHz |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/Yes |
| Input Current | 200mA |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.06 ns |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCM61004RHBT Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. 32-VFQFN Exposed Pad contains this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 32 terminations found in the file. Basically, this time clock generator needs a voltage of 3.3V. In this clock generator, LVCMOS, Crystal is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. RF synthesizers based on this clock provide frequencies up to 683.27MHz maximum. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. LVCMOS, LVDS, LVPECL is designed for clock generator's output. As far as electrical parts go, this component can be classified as a Clock Generator component. Microprocessor-specific clock PLL with 32 bits. Related electrical parts can be found for the base part number CDCM61004. There are a number of 32 pins that are available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that frequency generators can handle. The output frequency can be amplified as high as possible with its 4 signal outputs. Low timing skew is offered by this RF synthesizer at maximum 0.06 ns. At frequencies of 683.28MHz, RF synthesizer achieves high efficiency. Time clock generator requires a supply current of 108mA to fully function. This RF synthesizer operation requires a maximum current of 65mA. As a result, the load capacitance of this PLL is 5pF. There is no doubt that the TR package is an ideal fit for this clock generator ic.
CDCM61004RHBT Features
Available in the 32-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 5pF
CDCM61004RHBT Applications
There are a lot of Texas Instruments CDCM61004RHBT Clock Generators applications.
- FM demodulation networks for FM operations
- Clock generation systems
- Automatic control
- Satellite receivers
- Mechanical devices
- Signal generator
- Microwave point-to-point systems
- FMCW Radar
- Satellite navigation communication
- Frequency synthesis
