Parameters |
Packing Method |
TR |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
2.2GHz |
Base Part Number |
CDCM7005 |
Output |
LVCMOS, LVPECL |
Pin Count |
48 |
Number of Outputs |
5 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Interface |
Serial |
Number of Circuits |
1 |
Nominal Supply Current |
210mA |
Max Supply Current |
210mA |
Frequency (Max) |
1.5GHz |
Number of Inputs |
2 |
Input |
LVCMOS, LVPECL |
Ratio - Input:Output |
3:10 |
Max I(ol) |
0.008 A |
PLL |
Yes with Bypass |
Differential - Input:Output |
Yes/Yes |
Propagation Delay (tpd) |
3 ns |
Input Current |
5μA |
Divider/Multiplier |
Yes/No |
Height |
1mm |
Length |
7mm |
Width |
7mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-VFQFN Exposed Pad |
Number of Pins |
48 |
Weight |
138.005479mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Clock Synchronizer and Jitter Cleaner |
Additional Feature |
USER DEFINABLE FIVE DIFFERENTIAL LVPECL OUTPUT; DIFFERENTIAL VCO IN CLOCK |
CDCM7005RGZT Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. There is a clock generator embedded in the 48-VFQFN Exposed Pad package. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 48 terminations to be found. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVPECL. 1 circuits are used to achieve clock PLL's superior flexibility. An up to 1.5GHz frequency is provided by this clock-based RF synthesizer. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. The supply voltage (Vsup) should be kept above 3V for normal operation. As long as you provide 3V~3.6V supply voltage, it will work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. LVCMOS, LVPECL logic levels are supported by this RF synthesizer. This electronic component can be classified as a Clock Synchronizer and Jitter Cleaner. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. The related electronic parts of part number CDCM7005 are listed below. PLL is designed with 48 pins. Time clock generator is capable of handling a voltage of 3.3V. The frequency generator has a USER DEFINABLE FIVE DIFFERENTIAL LVPECL OUTPUT; DIFFERENTIAL VCO IN CLOCK feature to improve the output of clock signals. 5 signal outputs maximi5e the output frequency. At a frequency of 2.2GHz, the system can achieve high efficiency. This frequency synthesizer operates at a maximum current of 210mA. Ideally, this electronic frequency generator fits the TR package. 2 inputs are employed on this electronic frequency generator.
CDCM7005RGZT Features
Available in the 48-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDCM7005RGZT Applications
There are a lot of Texas Instruments CDCM7005RGZT Clock Generators applications.
- Local oscillators (LOs)
- Ultrasound diagnosis
- Electronic equipment
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Sampling clocks for ADC and DAC
- Closed circuit systems
- Melting
- Cable television converter boxes
- Electronic countermeasures
- Microwave radio