CDCR61APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Clock Generators |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 18.75MHz |
| Base Part Number | CDCR61 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 50mA |
| Power Dissipation | 1.4W |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, PROCESSOR SPECIFIC |
| Frequency (Max) | 400MHz |
| Input | Crystal |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 18.75MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Max Duty Cycle | 55 % |
| Main Purpose | Memory, RDRAM |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCR61APW Overview
You can find it in the package Tube. As part of the packaging, there is a serial number 16-TSSOP (0.173, 4.40mm Width) associated with the product. Clock program is recommended to mount using type Surface Mount. 16 terminations are found in it. Voltage is provided by the part at 3.3V. To run 260, we use the peak reflow temperature of this part. CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs are present in this device. There has been a detection of a device with 1. normaloperation has a frequency of 400MHz. Temperatures can be varied in the 0°C~85°C range. There is a possibility of the component supplying a voltage of 3V~3.6V. Component Memory, RDRAM serves the main purpose. As the output, LVCMOS should be used. You need to start at CDCR61 to find information about a part. Surface Mount is recommended for mounting. With 16 pins, the device is designed. There are 16 pins on it. Circuits application is recommended that the supply voltage remain at 3.3V. In the family Clock Generators, the device belongs. Circuits application is capable of maintaining 2 outputs on the device. An average supply current of 6.5mA is used for this DAC. Using a frequency of 18.75MHz will allow it to reach excellent efficiency.
CDCR61APW Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
run the output at th range of LVCMOS
with 16 Pins
operate supply voltage at the range of 3.3V
CDCR61APW Applications
There are a lot of Texas Instruments CDCR61APW application specific timer?applications.
- Storage area networks
- Fibre Channel, SAN
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Printers, scanners, projectors
- Audio/video
- Ethernet Switches, Routers
- Small Cells, Mobile Backhaul/Fronthaul
- Broadcast video
- Broadcast video
- 1 GbE and 10 GbE
