CDCU877ARHARG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 103.986051mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Voltage - Supply | 1.7V~1.9V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Base Part Number | CDCU877 |
| Pin Count | 40 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 1.8V |
| Number of Circuits | 1 |
| Nominal Supply Current | 500μA |
| Family | 877 |
| Output Characteristics | 3-STATE |
| Input | SSTL-18 |
| Ratio - Input:Output | 1:10 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| Max I(ol) | 0.009 A |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Main Purpose | Memory, DDR2 |
| Same Edge Skew-Max (tskwd) | 0.035 ns |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCU877ARHARG4 Overview
The Tape & Reel (TR) package contains it. As part of the packaging, there is a serial number 40-VFQFN Exposed Pad associated with the product. Surface Mount is the most recommended mounting type. In it, there are 40 terminations. Parts with 1.8V voltage are provided by the part. In order to run 260, the peak reflow temperature of this part is taken into account. 1 are present on the device. Temperatures can be varied in the -40°C~85°C range. A component can supply 1.7V~1.9V voltage. In this component, Memory, DDR2 is the primary function. The base part number CDCU877 is the place where you can start your search for information. The Surface Mount mounting method is recommended. There are 40 pins on the device. Circuits application has 40 pins. 1.8V is the recommended supply voltage. Circuits application is a member of the Clock Drivers family. There is 10 problem with the device maintaining 10 outputs. If you choose a part from the 877 family, you can find parts that are related to that part. Circuits application uses a logic IC type of PLL BASED CLOCK DRIVER. This device is extremely efficient at frequencies of 400MHz.
CDCU877ARHARG4 Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 40 Pins
operate supply voltage at the range of 1.8V
Logic IC Type: PLL BASED CLOCK DRIVER
CDCU877ARHARG4 Applications
There are a lot of Texas Instruments CDCU877ARHARG4 application specific timer?applications.
- Broadcast video
- Ethernet Switches, Routers
- 10/40/100G network line cards
- 1 GbE and 10 GbE
- Routers
- MSAN/DSLAM/PON
- Processor and FPGA clocking
- Servers, Storage, Search Acceleration
- Print Imaging
- Print Imaging
