CDCU877GQLR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 52 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 52 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.7V~1.9V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Frequency | 400MHz |
| Base Part Number | CDCU877 |
| Pin Count | 52 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 1.8V |
| Number of Circuits | 1 |
| Nominal Supply Current | 500μA |
| Family | 877 |
| Output Characteristics | 3-STATE |
| Input | SSTL-18 |
| Ratio - Input:Output | 1:10 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| Max I(ol) | 0.009 A |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Main Purpose | Memory, DDR2 |
| fmax-Min | 340 MHz |
| Same Edge Skew-Max (tskwd) | 0.035 ns |
| Height | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CDCU877GQLR Overview
The Tape & Reel (TR) package provides access to it. Clock program is contained in a package of 56-VFBGA. Clock program is recommended to mount using type Surface Mount. 52 terminations are found in it. Voltage is provided by the part at 1.8V. Running 235 utilizes this part's peak reflow temperature. The device contains 1. Temperatures can be varied in the -40°C~85°C range. There is 1.7V~1.9V voltage limitation on the component. It can supply a voltage of 1.7V~1.9V. The main purpose of the component is Memory, DDR2. The base part number CDCU877 is the place where you can start your search for information. Ideally, it should be mounted with Surface Mount. 52 pins are provided on the device. There are 52 pins on it. Circuits application is recommended that the supply voltage remain at 1.8V. Clock Drivers is the family name of the device. In this device, 10 outputs can be maintained. Circuits application is possible to search for related parts based on the 877 family of parts. Logic IC type PLL BASED CLOCK DRIVER is used. Using frequency 400MHz, it achieves excellent efficiency.
CDCU877GQLR Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 235
Include 1 Circuits
with 52 Pins
operate supply voltage at the range of 1.8V
Logic IC Type: PLL BASED CLOCK DRIVER
CDCU877GQLR Applications
There are a lot of Texas Instruments CDCU877GQLR application specific timer?applications.
- DSLAM
- Printers, scanners, projectors
- Servers, storage
- Storage area networks
- Test and Measurement
- Network Attached Storage
- Handheld Instrumentation
- Small Cells, Mobile Backhaul/Fronthaul
- Carrier Ethernet switches
- Routers
