CDCV855IPWR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | PLL Clock Driver |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 180MHz |
| Base Part Number | CDCV855 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Family | 855 |
| Output Characteristics | 3-STATE |
| Input | SSTL-2 |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | No/No |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCV855IPWR Overview
As a clock IC, it uses the Tape & Reel (TR) package. There is a clock generator embedded in the 28-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 28 terminations found in this file. The supply voltage of 2.5V allows for high efficiency. A clock generator's input is called SSTL-2 and it is designed as the input for this clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would be possible to supply this clock PLL with 2.7V of power. A maximum voltage of 2.3V should be used for this frequency generator for safety reasons. Clock generator ic works with 2.3V~2.7V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. It is possible to classify this electronic component as a PLL Clock Driver. It is a 28-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CDCV855. There are a number of 28 pins that are available on the clock generators. Time clock generator can handle a voltage of 2.5V as the supply voltage. A Clock Drivers clock generator is essentially what this device is. Clock PLL is configured with 4 output. Low timing skew is offered by this RF synthesizer at maximum 0.05 ns. This clock generator belongs to the family of 855. Using a frequency of 180MHz allows frequency synthesizer to achieve high efficiencies. TR is an ideal package for this electronic frequency generator.
CDCV855IPWR Features
Available in the 28-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCV855IPWR Applications
There are a lot of Texas Instruments CDCV855IPWR Clock Generators applications.
- Automatic control system test
- Radio receivers
- Digital HDTV systems
- Multi-function printers
- Cellular/4G
- Signal frequency synthesis circuits
- FM demodulation networks for FM operations
- Electronic countermeasures
- Modems
- High-speed communication applications
