Parameters |
Lifecycle Status |
NRND (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
0°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
48 |
Type |
PLL Clock Driver |
Packing Method |
TR |
Voltage - Supply |
2.3V~2.7V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Frequency |
180MHz |
Base Part Number |
CDCV857 |
Pin Count |
48 |
Number of Outputs |
10 |
Operating Supply Voltage |
2.5V |
Supply Voltage-Max (Vsup) |
2.7V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Circuits |
1 |
Nominal Supply Current |
12mA |
Family |
857 |
Output Characteristics |
3-STATE |
Input |
Clock |
Ratio - Input:Output |
1:10 |
PLL |
Yes with Bypass |
Differential - Input:Output |
Yes/Yes |
Divider/Multiplier |
No/No |
Same Edge Skew-Max (tskwd) |
0.075 ns |
Height |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CDCV857ADGGR Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. Clock PLL is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. 48 terminations can be found in frequency synthesizer. This time clock generator should be voltaged at 2.5V. This Clock PLL will be fed by Clock as its input. To access the electronic component's full performance, 1 circuits are implemented. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators can take up to 2.7V of power as a maximum supply voltageIt is safe to use this frequency synthesizer with a supply voltage above 2.3V. Clock generators should operate with the voltage supply of 2.3V~2.7V. Statistics suggest that the ambient temperature be set at 0°C~85°C, which is what is estimated by the test. This is an electronic part that can be classified as a PLL Clock Driver in this case. Microprocessors are specifically designed to use this clock-generating IC, which has a 48-bit output. According to the base part number CDCV857, its related parts can be found. A 48 pin is available on the PLL. Supply voltage 2.5V is what time clock generator can handle. 10 signal outputs are provided for enhancing output frequency as much as possible. As a result of this digital clock generator, there is a low timing skew at 0.075 ns max. The 857 family of parts can be used to find electric parts that are similar to each other. By operating at a frequency of 180MHz, RF synthesizer is able to reali180MHze high efficiency. It is ideal for this electronic frequency generator to use the TR package.
CDCV857ADGGR Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCV857ADGGR Applications
There are a lot of Texas Instruments CDCV857ADGGR Clock Generators applications.
- Wireless infrastructure
- Automatic control
- Mixed mode (analog and digital) applications
- Local oscillators (LOs)
- Radio receivers
- DVD add-on cards for multimedia PCs
- HDD recorders
- Microwave point-to-point systems
- Mechanical devices
- Bit synchronization