banner_page

CDCVF2505PWR

3.3V PLL Clock Driver CDCVF2505 Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Cut Tape (CT)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CDCVF2505PWR
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 982
  • Description: 3.3V PLL Clock Driver CDCVF2505 Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 3V~3.6V Cut Tape (CT) (Kg)

Details

Tags

Parameters
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Number of Pins 8
Weight 39.008944mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type PLL Clock Driver
Subcategory Clock Drivers
Packing Method TR
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Frequency 200MHz
Base Part Number CDCVF2505
Pin Count 8
Number of Outputs 5
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Operating Supply Current 5μA
Output Characteristics 3-STATE WITH SERIES RESISTOR
Input LVTTL
Ratio - Input:Output 1:5
PLL Yes with Bypass
Differential - Input:Output No/No
Height 1.2mm
Length 3mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

CDCVF2505PWR Overview


Clock generator is packaged in the way of Cut Tape (CT). The 8-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 8 terminations. The supply voltage of 3.3V allows for high efficiency. A clock generator's input is called LVTTL and it is designed as the input for this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. PLL clock is mounted in the way of Surface Mount. The maximal supply voltage (Vsup) reaches 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. Clock generator ic works with 3V~3.6V. Based on test statistics, ambient temperature should be set at -40°C~85°C. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. Microprocessors are specifically designed to use this clock-generating IC, which has a 8-bit output. Related electrical parts can be found for the base part number CDCVF2505. PF synthesizers is equipped with 8 pins. This time clock generator can handle a voltage of 3.3V as its supply voltage. The device is usually classified as a type of Clock Drivers device. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. High efficiency is achieved when operating at a frequency of 200MHz. A supply current of 5μA needs to be provided to fully play RF synthesizer's function. This clock generator ic is ideal for the TR package that comes with it.

CDCVF2505PWR Features


Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCVF2505PWR Applications


There are a lot of Texas Instruments CDCVF2505PWR Clock Generators applications.

  • Radiotelephones
  • Clock synchronization
  • PCI express cards
  • Radio receivers
  • Wireless handsets
  • Microwave point-to-point systems
  • Reference signals to RF systems
  • Automatic test equipment
  • Digital logic circuits
  • 1 Gigabit Ethernet

Write a review

Note: HTML is not translated!
    Bad           Good