CDCVF2509APWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | PLL Clock Driver |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | CDCVF2509 |
| Pin Count | 24 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 25pF |
| Power Dissipation | 700mW |
| Frequency (Max) | 175MHz |
| Output Characteristics | SERIES-RESISTOR |
| Input | LVTTL |
| Ratio - Input:Output | 2:10 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCVF2509APWRG4 Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. As a result, frequency synthesizers can be found to contain 24 terminations. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 175MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximum voltage this clock PLL can handle is 3.6V. It is safe to use this frequency synthesizer with a supply voltage above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Using the test statistics, we estimate that the ambient temperature should be 0°C~85°C. A PLL Clock Driver is a classification for the electronic part in question. It is a 24-bit clock PLL designed specifically for microprocessors. The related electrical components for the base part number CDCVF2509 can be found below. There is a 24 pin that is available on the frequency synthesizers. Supply voltage 3.3V is what time clock generator can handle. This clock generator can be classified as a kind of Clock Drivers in general. 9 signal outputs allow for maximi9ation of output frequency. In terms of load capacitance, analog clock generator is capable of delivering 25pF. This clock generator ic is ideal for the TR package that comes with it.
CDCVF2509APWRG4 Features
Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2509APWRG4 Applications
There are a lot of Texas Instruments CDCVF2509APWRG4 Clock Generators applications.
- FSK demodulators
- PCI express cards
- Simple clock clean-up circuits
- Radiotelephones
- Cell phones
- Cable television converter boxes
- GPS systems
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Wide area power system
- Closed circuit systems
