CDCVF857DGGRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | PLL Clock Driver |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 220MHz |
| Base Part Number | CDCVF857 |
| Pin Count | 48 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Family | 857 |
| Output Characteristics | 3-STATE |
| Input | SSTL-2 |
| Ratio - Input:Output | 2:11 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 3.5 ns |
| Divider/Multiplier | No/No |
| Same Edge Skew-Max (tskwd) | 0.04 ns |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCVF857DGGRG4 Overview
Clock generator is packaged in the way of Tape & Reel (TR). The 48-TFSOP (0.240, 6.10mm Width) package contains this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains a total of 48 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 2.5V. As the Clock PLL's input, SSTL-2 is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Approximately 2.7V is the maximum supply voltage needed by this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 2.3V. There should be 2.3V~2.7V provided with this RF synthesizer. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. This is an electronic part that can be classified as a PLL Clock Driver in this case. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. This part number is related to its related electronic parts. There are 48 pins on the frequency generators that are available for use. The maximum supply voltage that clock generator can handle is 2.5V. As a result, it is commonly classified as a type of Clock Drivers clock PLL. The frequency synthesizer features 10 signal outputs to ensure as high a frequency as possible. The maximal same edge skew (tskwd) can not be exceeded. By searching for the 857 family, it is possible to find similar electrical components. At frequencies of 220MHz, RF synthesizer achieves high efficiency. There is no doubt that the TR package is an ideal fit for this clock generator ic.
CDCVF857DGGRG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCVF857DGGRG4 Applications
There are a lot of Texas Instruments CDCVF857DGGRG4 Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Infotainment systems
- Picocells, femtocells and small cells
- Clock synchronization
- DVD add-on cards for multimedia PCs
- Mechanical devices
- Small signal recovery
- Cellular/4G
- Mobile telephones
- Televisions
