CL320SG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~119°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 0Hz~100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CL320 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 22mA |
| Max Supply Voltage | 90V |
| Output Current | 20mA |
| Max Supply Current | 2.3mA |
| Max Output Voltage | 90V |
| Voltage - Output | 4V~90V |
| Min Input Voltage | 6.5V |
| Max Input Voltage | 90V |
| Output Current per Channel | 20mA |
| Min Output Voltage | 4V |
| Internal Switch(s) | Yes |
| High Level Output Current | 20mA |
| Low Level Output Current | 20mA |
| Dimming | PWM |
| Number of Segments | 3 |
| Switching Frequency | 100kHz |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CL320SG-G Overview
8-SOIC (0.154, 3.90mm Width) Exposed Pad saves board space. LED drivers design with 3 outputs.It is possible to mount the led driver using Surface Mount.As a Linear, it has high efficiency and reliability.When the temperature is -40°C~119°C TJ, it can work normally.The benefits of Backlight are considerable.The frequency of 0Hz~100kHz is used as the basis for its operation.There are 8 terminations that are designed to operate with it.With a base of 8, this LED light driver is configured.3 segments are present.It's mounted in Surface Mount.The base part number for this LED driver is CL320.In this case, 90V is acceptable.The device has a voltage output of 4V~90V volts.A minimal input voltage of 6.5V is required for it to operate.Whenever the maximum supply current is allowed, the value reaches 90V.When the maximum supply current is below 2.3mA, it is capable of delivering high efficiency.Loads can only be powered by 20mA current.As long as the switching frequency is maintained at 100kHz, this electronic component is able to perform all of its functions properly.At maximum output current 22mA, it will deliver all the benefits of a LED driver.Ideally, the output voltage should not exceed 90V.The minimal voltage it outputs maintains at 4V.
CL320SG-G Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~119°C TJ
Frequency of 0Hz~100kHz
Switching frequency of 100kHz
CL320SG-G Applications
There are a lot of Microchip Technology CL320SG-G LED Driver ICs applications.
- Scanners and Handy Terminals
- LED Lightings for Inspection Devices
- A- lamps
- Gallery lighting
- Flicker-free LED Lighting using R1580N
- Replacement lamps
- General lighting
- OLED power supply for portable equipment
- Amusement Machines
- Constant Voltage Power Source for portable equipment
