CL325SG-G
| Parameters | |
|---|---|
| Voltage - Supply (Min) | 6.5V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~119°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 0Hz~100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CL325 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 27.5mA |
| Max Supply Voltage | 90V |
| Max Supply Current | 2.3mA |
| Max Output Voltage | 90V |
| Voltage - Output | 4V~90V |
| Output Current per Channel | 25mA |
| Min Output Voltage | 4V |
| Internal Switch(s) | Yes |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Dimming | Analog, PWM |
| Number of Segments | 3 |
CL325SG-G Overview
In order to save board space, the led driver uses the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package. Typically, LED drivers have 3 outputs.The led light driver is mounted using Surface Mount.In this case, it emerges as a Linear with a high efficiency.The led light driver can work at -40°C~119°C TJ.There are considerable benefits for Backlight.It operates at 0Hz~100kHz frequency.It operates with terminations of 8.The base of this board is configured as 8 pins.A voltage supply less than 6.5V will cause undetermined failures.A total of 3 segments are estimated.The mount is in the direction of Surface Mount.It's under the CL325 base part number.90V is an acceptable voltage.It produces a voltage of 4V~90V volts.A minimal supply current is required in order for this device to provide high efficiency.When operating with a 27.5mA output current, the LED driver delivers all the benefits.It is important to keep the output voltage below 90V.It maintains a voltage of 4V at its minimum output.
CL325SG-G Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~119°C TJ
Frequency of 0Hz~100kHz
CL325SG-G Applications
There are a lot of Microchip Technology CL325SG-G LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- General lighting
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Replacement lamps
- High-end retail lighting
- Architectural lighting
- Medical surgery lighting
- Portable lighting
