CL330SG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~119°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 0Hz~100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | CL330 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 33mA |
| Max Supply Voltage | 90V |
| Max Supply Current | 2.3mA |
| Max Output Voltage | 90V |
| Voltage - Output | 4V~90V |
| Output Current per Channel | 30mA |
| Min Output Voltage | 4V |
| Internal Switch(s) | Yes |
| High Level Output Current | 30mA |
| Low Level Output Current | 30mA |
| Dimming | Analog, PWM |
| Number of Segments | 3 |
| Voltage - Supply (Min) | 6.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.7mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
CL330SG-G Overview
The 8-SOIC (0.154, 3.90mm Width) Exposed Pad package conserves board space. For the design of this LED driver, 3 outputs are used.As far as mounting is concerned, Surface Mount is adopted.When it emerges as a Linear, it performs extremely well and is highly reliable.-40°C~119°C TJ is the operating temperature and it works fine.There are considerable benefits for Backlight.As a result, it operates based on the frequency of 0Hz~100kHz.The system operates with a termination of 0.There may be undetermined failures if the voltage supply falls below 6.5V.A total of 3 segments are estimated.The mount is in the way of Surface Mount.CL330 is the base part number for this LED driver.It is acceptable to supply voltages of 90V volts.The output voltage is 4V~90V.When the maximum supply current is below 2.3mA, it is capable of delivering high efficiency.When operating with a 33mA output current, the LED driver delivers all the benefits.It is important that the output voltage does not exceed 90V.A voltage of 4V is maintained as the minimal voltage it outputs.
CL330SG-G Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~119°C TJ
Frequency of 0Hz~100kHz
CL330SG-G Applications
There are a lot of Microchip Technology CL330SG-G LED Driver ICs applications.
- Medical surgery lighting
- Constant Voltage Power Source for portable equipment
- Museum lighting
- LED backlight driver for LCD displays for portable equipment
- Sports Facility Lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General lighting
- Down lighting
- LED Lightings for Inspection Devices
