CL525N3-G
| Parameters | |
|---|---|
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Weight | 453.59237mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Lighting, Signage |
| Subcategory | Display Drivers |
| Terminal Position | SINGLE |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | CL525 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 27.5mA |
| Max Supply Voltage | 90V |
| Output Current | 25mA |
| Max Output Voltage | 90V |
| Voltage - Output | 1V~90V |
| Min Input Voltage | 4.75V |
| Max Input Voltage | 90V |
| Output Current per Channel | 25mA |
| Min Output Voltage | 1V |
| High Level Output Current | 27.5mA |
| Low Level Output Current | 25mA |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
CL525N3-G Overview
In order to save board space, the TO-226-3, TO-92-3 (TO-226AA) package is used. Typically, LED drivers have 1 outputs.The mounting method adopted is Surface Mount.With high reliability and efficiency, this emerges as a Linear.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.A number of benefits are available to Lighting, Signage.The operation of this system is supported by 3 terminations.It has a base configuration of 3 pins.In total, it includes 1 segments.This is mounted by Surface Mount, Through Hole.LED drivers can be found under the base part number CL525.It's acceptable for the voltage to be 90V.A 1V~90V volt output voltage is provided by this device.Further, its characteristics allow it to be classified as Display Drivers.A minimal input voltage of 4.75V is required for it to operate.There is 90V maximum value for supply current.It is possible to supply the load with 25mA current.A LED driver that operates at 27.5mA output current provides all the benefits of a LED driver.It is important that the output voltage does not exceed 90V.It maintains a 1V minimum voltage output.
CL525N3-G Features
Available in the TO-226-3, TO-92-3 (TO-226AA) package
Operating temperature of -40°C~125°C TJ
CL525N3-G Applications
There are a lot of Microchip Technology CL525N3-G LED Driver ICs applications.
- Stage Lighting and Signage
- Other Electronic Devices
- Down lighting
- Architectural lighting
- Panel lighting
- Sports Facility Lighting
- General lighting
- LED Lighting PFCs, Linear Dimmable
- Auxiliary lights for on-vehicle cameras
- Scanners and Handy Terminals
