CLV4053ATPWRG4Q1

14ns, 14ns SPDT 75Ohm DUAL Analog Switches 74LV4053 16 Pins 100nA 2.3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CLV4053ATPWRG4Q1
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 630
Description: 14ns, 14ns SPDT 75Ohm DUAL Analog Switches 74LV4053 16 Pins 100nA 2.3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	75Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.3V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74LV4053
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	3
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Number of Bits	2
Propagation Delay	9 ns
Turn On Delay Time	20 ns
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	75Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 8.2pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Crosstalk	-45dB @ 1MHz
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CLV4053ATPWRG4Q1 Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~105°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 3 channels. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPDT switching are used to construct these analog switch ics. There are 3 circuits in this multiplexer. Look for analog switch ic variants by searching with 74LV4053. Internally, this switch multiplexer has a resistance of 75Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 20μA current would suffice. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. 50MHz bandwidths enable data to be transferred. It is capable of carrying out 2-bit operation. It comes from the Automotive, AEC-Q100 series.