CLVC1G374QDBVRQ1
| Parameters | |
|---|---|
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 40mA 40mA |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
CLVC1G374QDBVRQ1 Overview
SOT-23-6is the packaging method. There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 1.65V~5.5V. The operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the Automotive, AEC-Q100, 74LVCseries contain this type of chip. There should be no greater frequency than 175MHzon its output. A total of 6 terminations have been made. Members of the 74LVC1G374family make up this object. It is powered by a voltage of 1.8V . Its input capacitance is 3pFfarads. Electronic devices of this type belong to the LVC/LCX/Zfamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 6. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 1bits in its design. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. 1 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TR based on its reliable performance. This flip flop has a total of 2ports. The output current of 24mA makes it feature maximum design flexibility. The JK flip flop is with 3 output lines to operate. It consumes a total of 10μA quiescent current at any given time.
CLVC1G374QDBVRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
6 pins
1 Bits
CLVC1G374QDBVRQ1 Applications
There are a lot of Texas Instruments CLVC1G374QDBVRQ1 Flip Flops applications.
- Frequency division
- Memory
- Computers
- Shift Registers
- Single Up Count-Control Line
- 2 – Bit synchronous counter
- Buffered Clock
- Bounce elimination switch
- Frequency Dividers
- Power down protection
