CLVC257AQPWRG4Q1
| Parameters | |
|---|---|
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 4.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
CLVC257AQPWRG4Q1 Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Multiplexer.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~3.6V, designers have superior flexibility.Multiplexers from the Automotive, AEC-Q100, 74LVC series can be used in a wide range of applications.The basic configuration includes 16 terminations.There is a base part number of 74LVC257 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 2.7V voltage.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.This supply type employs Single.Currently, it is configured with 16 pins.The mounting point is Surface Mount.The logic switch object belongs to the family of LVC/LCX/Z.The multiplexer ic provides 2 bits.Vsup should be kept at 2V to prevent some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.Normally, 3.3V is powered by a battery.There are 1 outputs designed for the operation of the turn signal switch.The multiplexer provides 8 inputs.The switches packaging is based on TR.Transmission is carried out over 4 channels in the turn signal switch's circuit.
CLVC257AQPWRG4Q1 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
CLVC257AQPWRG4Q1 Applications
There are a lot of Texas Instruments CLVC257AQPWRG4Q1 Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- Automation system
- Automatic health monitoring systems
- Electronic circuits
- Microprocessor memory systems
- Code converters
- Textile mills
- A robotic vehicle with the metal detector
- Enabling different rows of memory depending on address in memory chips
- PCIe
