banner_page

CLVC373AQDWRG4Q1

D-Type, Latch 2V~3.6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CLVC373AQDWRG4Q1
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 161
  • Description: D-Type, Latch 2V~3.6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74LVC Series 74LVC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100, 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74LVC373
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 7.5 ns
Quiescent Current 10μA
Turn On Delay Time 1 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW/HIGH
Independent Circuits 1
Number of Output Lines 8
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CLVC373AQDWRG4Q1 Overview


It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 2V~3.6V. The operating temperature is -40°C~125°C. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74LVC series. The design of this electronic part is based on 8 bits. This device has been designed with 20 terminations available. It belongs to 74LVC373 family. The device works with a voltage of 2.7V for its supply voltage. There are 20 pins on it. It is a member of the LVC/LCX/Z family of electronic devices. With the design of the board, there are only 20 pins. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. FF/Latches is the subcategory of this part. Vsup reaches 3.6V as the maximum supply voltage. There are 3.3V power supplies attached to it. The supply voltage (Vsup) should be greater than 2V. The reliability of this device makes it well suited to TR. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. There are no external factors that affect it, so it consumes 10μA quiescent current.

CLVC373AQDWRG4Q1 Features


20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies

CLVC373AQDWRG4Q1 Applications


There are a lot of Texas Instruments CLVC373AQDWRG4Q1 Latches applications.

  • Clocks
  • Serial Output Data Queuing
  • Automotive HEV/EV Powertrain
  • High-speed logic
  • Double bus register system
  • Buffer/Storage Registers
  • Storage
  • Shift right register
  • Shift left register
  • Display

Write a review

Note: HTML is not translated!
    Bad           Good