CLVC373AQPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CLVC373AQPWRG4Q1 Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it. The package is in the form of Tape & Reel (TR). In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The supply voltage of the device is 2V~3.6V. There is a temperature of -40°C~125°C at which the system operates. The Automotive, AEC-Q100, 74LVC series contains FPGAs of this type. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. 74LVC373 is the family name of it. With the supply voltage set at 2.7V, it is able to operate. It is equipped with 20 pin count. It is a member of the LVC/LCX/Z family of electronic devices. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. 2 ports are available on this device. The part belongs to the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 3.6V. The system is powered by 3.3V sources. The supply voltage (Vsup) should be greater than 2V. Based on its reliable performance, this device is suitable for TR. Input lines are generated as binary equivalents by 8 output lines. The current consumed by the device is 10μA volts in quiescent mode, which cannot be affected by external factors.
CLVC373AQPWRG4Q1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
CLVC373AQPWRG4Q1 Applications
There are a lot of Texas Instruments CLVC373AQPWRG4Q1 Latches applications.
- Synchronous frequency dividers
- Accumulator Registers
- Timers
- Clocks
- Automatic test equipment
- Up/down difference counting
- Parallel data synchronization
- Frequency
- Sample and hold register
- Relay
