CLVC374AQDWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CLVC374AQDWRG4Q1 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 2V~3.6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. The Automotive, AEC-Q100, 74LVCseries comprises this type of FPGA. You should not exceed 100MHzin its output frequency. D latch consists of 1 elements. The number of terminations is 20. The 74LVC374family includes it. Power is supplied from a voltage of 2.7V volts. A 4pFfarad input capacitance is provided by this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. Surface Mount mounts this electronic component. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. The flip flop is designed with 8bits. The maximal supply voltage (Vsup) reaches 3.6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. A reliable performance of this D flip flop makes it well suited for use in TR. The D latch operates on 3.3V volts. This flip flop has a total of 2ports. As of now, there are 8input lines. Despite external influences, it consumes 10μAof quiescent current.
CLVC374AQDWRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
20 pins
8 Bits
3.3V power supplies
CLVC374AQDWRG4Q1 Applications
There are a lot of Texas Instruments CLVC374AQDWRG4Q1 Flip Flops applications.
- Set-reset capability
- Matched Rise and Fall
- ESCC
- Data storage
- Computers
- Bounce elimination switch
- Buffered Clock
- Individual Asynchronous Resets
- Common Clocks
- Single Up Count-Control Line
