CLVC573AQDWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.9 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CLVC573AQDWRG4Q1 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. This package has the format of Tape & Reel (TR). The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. The supply voltage of the device is 2V~3.6V. The temperature at which the machine is operating is -40°C~125°C. This FPGA is part of the Automotive, AEC-Q100, 74LVC series. The design of this electronic part is based on 8 bits. This device has 20 terminations. It belongs to 74LVC573 family. With a supply voltage of 2.7V, it operates. 20 pins are available on it. It is part of the family of electronic devices called LVC/LCX/Z. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has a total of 2 ports. The part is in the FF/Latches subcategory. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. There are 3.3V power supplies attached to it. It is recommended that the supply voltage (Vsup) be greater than 2V. Based on its reliable performance, this device is suitable for TR. Input lines are generated as binary equivalents by 8 output lines. It consumes 10μA current from its quiescent state without being affected by external factors at all.
CLVC573AQDWRG4Q1 Features
20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
CLVC573AQDWRG4Q1 Applications
There are a lot of Texas Instruments CLVC573AQDWRG4Q1 Latches applications.
- OC-48 communication systems
- Parallel data storage
- Motor Drives
- Instrumentation
- Meter applications
- Hammer
- Serial Input
- Shift register
- Bus system register with enable parallel lines at bus side
- Counter control
