Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74LVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LVC573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
6.9 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
2 ns |
Family |
LVC/LCX/Z |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW/HIGH |
Independent Circuits |
1 |
Number of Output Lines |
8 |
Translation |
N/A |
Delay Time - Propagation |
1ns |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CLVC573AQPWRG4Q1 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 2V~3.6V. The temperature at which the machine is operating is -40°C~125°C. It is a type of FPGA belonging to the Automotive, AEC-Q100, 74LVC series. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74LVC573. The device is operated when the supply voltage is set to 2.7V. It has 20 pins that makes it easy to use. It is a member of the LVC/LCX/Z family of electronic devices. There are 20 pins on it. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. The system is powered by 3.3V sources. It is recommended to have a higher supply voltage (Vsup) than 2V. Based on its reliable performance, this device is well suited to TR. 8 output lines provide binary equivalents of input lines. As far as external factors are concerned, it consumes 10μA of quiescent current without getting affected by them.
CLVC573AQPWRG4Q1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
CLVC573AQPWRG4Q1 Applications
There are a lot of Texas Instruments CLVC573AQPWRG4Q1 Latches applications.
- Serial Output Register
- Multi-line decoders
- Shift left with parallel loading
- Pattern Generators
- High-speed logic
- Counting
- Storage
- Serial Output Data Queuing
- Parallel Input
- Communication systems