banner_page

CLVTH162373MDLREP

D-Type, Latch 2.7V~3.6V 16 Bits Tri-State Latches 74LVTH Series 74LVTH162373 48 Pins DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CLVTH162373MDLREP
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 267
  • Description: D-Type, Latch 2.7V~3.6V 16 Bits Tri-State Latches 74LVTH Series 74LVTH162373 48 Pins DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Weight 600.301152mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74LVTH
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74LVTH162373
Pin Count 48
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 3.3V
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Load Capacitance 50pF
Number of Ports 2
Output Current 12mA
Number of Bits 16
Propagation Delay 5 ns
Quiescent Current 5mA
Turn On Delay Time 4.7 ns
Family LVT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 12mA 12mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Number of Output Lines 16
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.79mm
Length 15.88mm
Width 7.49mm
Thickness 2.59mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CLVTH162373MDLREP Overview


The 48-BSSOP (0.295, 7.50mm Width) package contains it. It is packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2.7V~3.6V. The temperature at which the machine is operating is -55°C~125°C. The 74LVTH series of FPGAs is the one this FPGA belongs to. The electronic part in this image has 16 bits. This device has been designed with 48 terminations available. The family it belongs to is 74LVTH162373. A 3.3V voltage supply is required for operation. The device is equipped with 48 pins. In terms of electronic devices, this one is in the LVT family. The pin configuration of the device is 48. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. There is a maximum voltage supply (Vsup) that reaches 3.6V. Based on its reliable performance, this device is appropriate for TR. Its 12mA output current allows for maximum design flexibility. For maximum efficiency, the supply voltage should be set to 3.3V. There are 16 output lines that correspond to the binary equivalents of the input line. Without external influences, it consumes 5mA of quiescent current. The element count is 2.

CLVTH162373MDLREP Features


48-BSSOP (0.295, 7.50mm Width) package
74LVTH series
16 Bits
74LVTH162373 family
48 pin count
48 pins
2 elements

CLVTH162373MDLREP Applications


There are a lot of Texas Instruments CLVTH162373MDLREP Latches applications.

  • Control circuits
  • Counter control
  • Pattern generators
  • Up-Down Johnson
  • Double bus register system
  • Parallel data storage
  • TV Set-top Boxes
  • Data acquisition
  • A/D and D/A conversion
  • Watches

Write a review

Note: HTML is not translated!
    Bad           Good