CLVTH16374IDLREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CLVTH16374IDLREP Overview
As a result, it is packaged as 48-BSSOP (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 2.7V~3.6V. -40°C~85°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74LVTHseries of FPGAs. You should not exceed 160MHzin its output frequency. In total, it contains 2 elements. As a result, it consumes 190μA quiescent current and is not affected by external forces. Terminations are 48. JK flip flop belongs to 74LVTH16374 family. It is powered by a voltage of 3.3V . JK flip flop input capacitance is 3pF farads. Devices in the LVTfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 48pins on it. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 16 Bits. Vsup reaches 3.6V, the maximal supply voltage. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. This flip flop has a total of 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V. This T flip flop features a maximum design flexibility due to its output current of 64mA. There are 8 output lines on it. Despite external influences, it consumes 5mAof quiescent current.
CLVTH16374IDLREP Features
Tape & Reel (TR) package
74LVTH series
48 pins
16 Bits
CLVTH16374IDLREP Applications
There are a lot of Texas Instruments CLVTH16374IDLREP Flip Flops applications.
- Bounce elimination switch
- ESCC
- Reduced system switching noise
- Computers
- Consumer
- Memory
- Common Clocks
- QML qualified product
- Memory
- Automotive
