CLVTH32373IGKEREP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH32373 |
| Pin Count | 96 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Propagation Delay | 2.7 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 2.9 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 32 |
| Length | 13.5mm |
| Width | 5.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CLVTH32373IGKEREP Overview
96-LFBGA contains it. Tape & Reel (TR) is the packaging method. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 2.7V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. This electronic part is designed with 32 Bits. There are 96 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to 74LVTH32373 family. The supply voltage of the device is 3.3V. 96 pins are provided. LVT is the family name of this electronic device. It is designed with 96 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V. High efficiency requires a voltage supply of 3.3V. Regardless of the input line, the binary equivalent of the input line will be generated by the 32 output lines. Without external influences, it consumes 10mA of quiescent current. There are 4 elements in it.
CLVTH32373IGKEREP Features
96-LFBGA package
74LVTH series
32 Bits
74LVTH32373 family
96 pin count
96 pins
4 elements
CLVTH32373IGKEREP Applications
There are a lot of Texas Instruments CLVTH32373IGKEREP Latches applications.
- Storage
- Parallel data storage
- Motor Drives
- Instrumentation
- Network Switches
- Shift left register
- Stacked or Push-Down Registers
- Meter applications
- Automotive Cluster
- Flip-flops
