CLVTH32374IGKEREP
| Parameters | |
|---|---|
| Base Part Number | 74LVTH32374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 380μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 900μm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | LIFEBUY (Last Updated: 1 day ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e0 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
CLVTH32374IGKEREP Overview
The flip flop is packaged in 96-LFBGA. The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2.7V~3.6V. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74LVTH series. This D flip flop should not have a frequency greater than 160MHz. A total of 4elements are contained within it. As a result, it consumes 380μA of quiescent current without being affected by external factors. There are 96 terminations,It is a member of the 74LVTH32374 family. It is powered from a supply voltage of 3.3V. The input capacitance of this JK flip flopis 3pF farads. In this case, the D flip flop belongs to the LVTfamily. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 96. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 32. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 2.7Vin order to ensure normal operation. As a result of its reliable performance, this T flip flop is suitable for TR. The flip flop has 2embedded ports. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. There are 8 output lines in this JK flip flop. 10mAquiescent current consumed.
CLVTH32374IGKEREP Features
Tape & Reel (TR) package
74LVTH series
96 pins
32 Bits
CLVTH32374IGKEREP Applications
There are a lot of Texas Instruments CLVTH32374IGKEREP Flip Flops applications.
- Clock pulse
- Balanced Propagation Delays
- Synchronous counter
- Bus hold
- Parallel data storage
- Guaranteed simultaneous switching noise level
- Consumer
- ESCC
- Frequency Dividers
- Power down protection
