CMP04FS
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Current Rating | 800μA |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CMP04 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Power Dissipation | 6mW |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 3mA |
| Response Time | 1.3 μs |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 3.3V~36V ±1.65V~18V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 3V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
CMP04FS Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL .Ready for shipping in Tube package.As you can see, the comparator has14 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type General Purpose .The device contains 14 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has 14 pins.Alternatively, you may search for CMP04 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 3mA .Electronic comparator is recommended that the nominal supply current of the device be 800μA .A current supply greater than 2mA may cause the comparator to malfunction.The device can be operated with 5V power supplies.In accordance with the voltage formula, the part's voltage gain is 106.02dB .For normal operation, there should be 5V operating supply voltage applied.
CMP04FS Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 3mA
Voltage Gain: 106.02dB
CMP04FS Applications
There are a lot of Analog Devices Inc. CMP04FS linear comparators applications.
- High-Speed Differential Line Receiver
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Zero-Crossing Detectors
- Point of load regulators
- Wide Range VCO; MOS Clock Timers
- Ultra-Low Power Systems
- Set Top Boxes
- Infotainment and Clusters
- Factory automation & control
