Parameters |
Quiescent Current |
3mA |
Response Time |
1.3 μs |
Common Mode Rejection Ratio |
100 dB |
Voltage - Supply, Single/Dual (±) |
3.3V~36V ±1.65V~18V |
Input Offset Voltage (Vos) |
1mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.2μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Supply Voltage Limit-Max |
36V |
Max Input Current |
100nA |
Input Bias Current |
100nA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
0.1μA @ 5V |
CMRR, PSRR (Typ) |
100dB CMRR, 100dB PSRR |
Current - Output (Typ) |
16mA @ 5V |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CMP04 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Number of Elements |
4 |
Operating Supply Current |
800μA |
Nominal Supply Current |
800μA |
Power Dissipation |
6mW |
Output Current |
16mA |
CMP04FS-REEL Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL .This package has been designed with Tape & Reel (TR) .As you can see, the comparator has14 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .A total of 4 elements can be found in it.The device is equipped with 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.This comparator has 14 pins.You can find more pin-to-pin solutions by searching CMP04 .A quiescent current of 3mA is displayed by this comparator.The nominal supply current of the device should be 800μA for normal use.Electronic comparator is possible to input a maximum current of 100nA into the device.According to the voltage formula, the part has a voltage gain of 106.02dB .
CMP04FS-REEL Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
Voltage Gain: 106.02dB
CMP04FS-REEL Applications
There are a lot of Analog Devices Inc. CMP04FS-REEL linear comparators applications.
- DC/DC and AC/DC power supplies
- Infotainment & cluster
- Battery-Powered Electronics
- Point of load regulators
- Portable and Battery-Powered Systems
- Multivibrators and High-Voltage Digital Logic Gates
- General-Purpose, Low-Voltage Applications
- Body Control Modules
- Ultra-Low Power Systems
- Window Comparators