CMP401GRU-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | CMP0401 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Max Supply Voltage | 16V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 110mW |
| Propagation Delay | 30 ns |
| Quiescent Current | 6mA |
| Response Time | 17 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Input Bias Current | 3μA |
| Current - Quiescent (Max) | 6mA1mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 3μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 60dB PSRR |
| Propagation Delay (Max) | 30ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CMP401GRU-REEL Overview
A convenient transport package is provided in 16-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, TTL output on this device.The part is shipped by Tape & Reel (TR) .The type of the chip can be classified as General Purpose .There are a total of 4 elements in it.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.This comparator has 16 pins.You can find more pin-to-pin solutions for your special requirements by searching CMP0401 .There is a quiescent current of 6mA in this comparator.Electronic comparator is recommended that the nominal supply current for the device be set to 2mA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 80dB .Temperatures above 125°C are not recommended.Comparator electronics cannot be operated at temperatures below -40°C .A comparator is designed to operate at a maximum supply voltage of 16V .
CMP401GRU-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 80dB
CMP401GRU-REEL Applications
There are a lot of Analog Devices Inc. CMP401GRU-REEL linear comparators applications.
- Power Supervision
- Appliances
- Pulse, Squarewave, and Time Delay Generators
- Power management
- Metering Systems
- Laptop Computers
- High-Speed Differential Line Receiver
- Automotive
- Consumer Medical Electronics
- Portable Battery Monitoring
